Introducing gasless flux-cored wire

2020-07-27

“Jinglei” brand gasless flux-cored wire was designed with special formulation.  The concept was to use metallurgical reaction that creates gas to form protective layer around the weld bead.  The welding results are better, and the welding efficiency 3-5 times better than manual electrode.

Key points of gasless flux-cored wire

● Suitable for welding light structure, such as carbon steel and galvanized sheet;

● High arc penetration, spray transfer, few spatter;

● Beautiful weld bead appearance, easy slag removal;

● Excellent wind resistance and blowhole resistance;

● Excellent all position weldability;

● Requires small welding machine, with great mobility;

● Do not need 380V power source, 220V is enough;

● No blowholes in galvanized sheet;

● Great bending toughness.

Product details and photos

Note: sizes under 1.0mm, use on 6mm or thinner plates, above 1.2mm can use on thicker plates

1.0mm wire

2mm thin plate, fillet weld

1.2mm wire

12mm thick plate, fillet weld

Product certification: CWB

GFL-71B-O

CWB certification

GFL-71G-O

CWB certification

Packing and recommended parameter

1Kg/5Kg Packing

Sample label

Recommended welding parameters

Recommended: For 1.2mm and 1.6mm diameter, use flat and vertical down position

<< return

prev：Welding for625 Nickel Alloy next：Introduction of Welding Consum...